The service life and installation methods of stainless steel color plates

Stainless steel color plates must have a place in the popular decorative materials market. You can find them on the street or at home. Colorful stainless steel plates are widely used in many fields due to their excellent corrosion resistance, wear resistance and easy processability. The service life of stainless steel color plates mainly depends on the length of the electroplating time. Theoretically, the longer the electroplating time, the higher the corrosion resistance of the steel plate. Considering the cost of many processing plants, the electroplating time of stainless steel cabinet plates is generally controlled within 15-30 minutes, and some processing plants even reduce the electroplating time by about 10 minutes to increase production and efficiency. Therefore, the entire service life of stainless steel color plates is greatly shortened. Secondly, 304 stainless steel can be used in most environments with high-quality corrosion resistance and heat resistance. However, enterprises usually use 201 stainless steel to save costs. After electroplating, there is no difference to the naked eye during the electroplating process, but time will prove everything. Over time, it will rust and show white spots on the stainless steel decorative plates. Besides the above two factors, the conditions during the usage process are also the main reasons affecting the service life of stainless steel color plates. If you use it in a harsh environment and do not maintain it in time, in this case, the service life of the stainless steel decorative plates may only last for a few years. Under normal circumstances, as long as it is clean and maintained in time, the service life of high-quality stainless steel color plates can reach 10 years. The service life and installation methods of stainless steel color plates According to technical requirements, installation goals and construction cost requirements, stainless steel color plates can be installed on the wall in various ways. The most common method is to directly fix the struts with expansion bolts and directly fix the plates on the wall with an impact drill. You can also use special glue on the wall and fix it with special glue, which can also be used for base processing, frame installation and stainless steel color plate installation. This method should be more suitable. Before installation, the walls and the interior of the installation area should be treated. Water and wires on the wall should be installed as planned. Relevant pressure pipelines have been tested and meet the requirements; the wall is dry and has the corresponding construction conditions. After marking is completed, the struts will start to be installed. Before installing the stainless steel color plates, the pre-construction must be inspected and accepted to ensure that the construction process is qualified. After the stainless steel color plates are installed, the construction is blocked before the construction, and the inspection and acceptance are inconvenient. After the acceptance is completed, the installation of the stainless steel color plates will begin. If it is a whole steel plate, it can be directly installed and sealed with beads. If there are multiple steel plates, they need to be installed and sealed with a folded edge to ensure that the struts follow the struts.